In addition to the stock cutters listed above, WKW has designed and manufactured scores of other fingerjoint configurations. WKW has pioneered the fingerjointing of engineered lumber products such as LVL (laminated veneer lumber),and other manmade wood products. Exotic hardwoods and very abrasive woods have also been successfully fingerjointed using WKW tooling. WKW's OPTI and Carbide cutters often are the solution.

OPTI fingerjoint cutters are a specially treated cutter designed primarily for natural woods. The extremely hard cutting surface of the OPTI cutters generally produces run times from 50 percent longer to several times longer than conventional High Speed Steel cutters. OPTI cutters have been used at several of the largest fingerjointing facilities in the United States.

WKW Carbide fingerjoint cutters are often the solution to fingerjointing very abrasive natural woods as well as manmade and engineered lumber products containing glues. Plywoods and other laminated materials that were once impossible to fingerjoint have now been successfully fingerjointed. Again, WKW was the innovator.

Whether your needs are for a specific fingerjoint profile, or for a cutterhead designed to fit your machine, or for a cutter material to machine a particularly hard or abrasive wood product, WKW has the technical support that you need. Give us a call.