|
Knives |
|
 |
Knife Downloads |
| Wisconsin Knife Works uses the best
raw material to produce premium knife steel, but WKW also adds 80 years
of engineering expertise and manufacturing experience. You can count on
WKW knife steel to provide consistent hardness for easy grinding, superior
edges for long runs and uniform thickness for improved balance and reduced
set-up time. Knives include M-2 High Speed Steel, AKM Tool Steel, Karbo
Krome™ D-2, Opti™ and the Bak-Pak™ Carbide Knife System. |
| Additional
Knife Information |
|
|
|
To view a catalog of parts select
the type of knife you are interested in... |
|
Thin
Knives |
|
A complete line of standard D-2 and
M-2 knives for jointing and planing applications. Manufactured from the
finest steels available and quality manufactured in the U.S.A.
|
|
Square
Edge Knives |
|
A line of D-2 and M-2 knives available
in 31" bars. Same quality manufacturing standards and steels.
|
|
Williams
& Hussey Knives |
|
Plain back as well as corrugated
knives for W&H mini-moulders. 25" bars only, drilled with twenty-four
7/16" diameter holes to work with W&H cutterheads.
|
|
Corrugated
Knives |
|
The finest quality steels available
manufactured with 80 years experience. 25" bars available in D-2
and M-2 steels with either 60 or 90 degree corrugations.
|
|
Shaper
Knives |
|
For industrial shaper applications
in either AKM or M-2 materials. 25" bars that are beveled to 30 degrees.
Edge notching is available on a custom basis.
|
|
Filler
Knives |
|
Used to balance out a cutterhead
if all knife slots are not utilized.
|
|
Lathe
and Slotted Knives |
|
Both Lathe and Slotted knives made from M-2 steel
are available. Lathe knives with a thickness of 1/4 inch are available
in 3 and 3 1/2 inch widths in lengths ranging from 1 inch to 5 1/2 inches.
Slotted knives are available in either 3/8 or 7/16 inch thicknesses with
1 - 3 slots. The standard slot is 5/8 x 21/32 to work with a 5/8 bolt.
|
|
BAK-PAK
Knives / Euro BAK-PAK Knives |
|
The industry leading carbide knife
system available in 38, 50, and 60 mm widths and working lengths from 180-230mm
lengths. A 10mm thick system of a carbide knife matched with a HSS backing
plate.
|
|
Carbide Inlayed and Solid Carbide Knives |
|
Both types of knives are often used in applications where wood materials with glue lines such as veneered products and edge glued materials are being machined. Carbide inlayed knives are available in the following widths: 32mm and 38mm (both with 15mm inlays), 45mm (with a 20mm inlay) and 50mm (with a 25mm inlay).
|
|
Planer/Jointer
Knives |
|
An assortment of the most popular
sizes, cut and balanced for optimal performance.
|
